-
V44W plastic quick connectors for VDA Cooling Water
Item： V31W plastic quick connectors NW12-ID12-45° for VDA Cooling Water VDA QC
Media: VDA Cooling Water
Buttons: 2
Size: NW12-ID12-45°
Hose fitted: Rubber Hose ID12～ID18
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
-
B39 Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID4-0 SAE
Item: B39 Plastic Quick Connector for Urea SCR System Φ7.89-5/16〞-ID4-0 SAE
Media: Urea SCR System
Size: Φ7.89-5/16〞-ID4-0 SAE
Hose fitted: PA 4.0×6.0
Material: PA12+30%GF
Working pressure : 5 to 7 bar
Temprature: -40°C to 120°C
Plastic Tee Connector for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
C6 Fuel Quick Connector Φ9.49-3/8″-9.49-7.89 SAE
Item: C6 Fuel Quick Connector Φ9.49-3/8″-9.49-7.89 SAE
Media: Fuel system
Buttons: 2
Size: Φ9.49-3/8″-9.49-7.89
Hose fitted: 9.49/7.89 end piece
Material: PA12+30%GF
Operating Pressure: 5 to 7 bar
Temprature: -30°C to 120°C
Plastic quick connector for automobiles have many advantages.
1. Light, which helps reduce the weight of the vehicle and improve fuel economy.
2.The plastic material is corrosion-resistant and can work stably in a variety of harsh environments.
3.The cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly.
If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
K8 plastic quick connectors CQC14-ID12-90° for CQC Cooling Water adaptor
Item：K8 plastic quick connectors CQC14-ID12-90° for CQC Cooling Water adaptor
Media: CQC Cooling Water
Buttons: 2
Size: CQC14-ID12-90°
Hose fitted: PA 12.0×14.0
Material: PA12+30%GF
Operating Pressure: 0.5-2 bar
Ambient Temprature: -40°C to 120°C
Plastic quick connector(also called quick disconnect) for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
Q9 ID8-ID9.3-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q9 ID8-ID9.3-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID8-ID9.3-0°
Hose fitted: PA 8.0×10.0 to Rubber Hose ID9.3
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
Plastic adaptor for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
Q3 ID6-ID6-0° Adaptor for plastic quick connectors to adjust the flow
Item：Q3 ID6-ID6-0° Adaptor for plastic quick connectors to adjust the flow
Media: Fuel/Water
Size: ID6-ID6-0°
Hose fitted: PA 6.0×8.0 or 5/16〞
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
Plastic adaptor for automobiles have many advantages. First, it is light, which helps reduce the weight of the vehicle and improve fuel economy. Secondly, the plastic material is corrosion-resistant and can work stably in a variety of harsh environments. Moreover, the cost is relatively low, cost-effective. The use method is as follows: the installation shall strictly follow the installation guide of the automobile manufacturer to ensure that the connection is firm. In daily use, check the working state of the regulator regularly. If any abnormality is found, it should be repaired or replaced in time. At the same time, avoid the regulator by external force impact and high temperature baking, to ensure its stable performance and service life.
-
G0F Φ15.82-End Cap plastic quick connectors Liquid/Vapor/Fuel System
Item: G0F Φ15.82-End Cap plastic quick connectors Liquid/Vapor/Fuel System
Media: Liquid/Vapor/Fuel System
Buttons: 2
Size: Φ15.82-End Cap
Material: PA12+30%GF
Operating Pressure: 5 to 7 bar
Temprature: -30°C to 120°C
The plastic quick connector end cap for automobiles has significant advantages. It is made of plastic material, light weight, easy to install and operate, will not increase the burden of the car. Plastic has a strong corrosion resistance, can adapt to the complex use of the automobile environment, prolong the service life. Its fast connection design, greatly improve the installation efficiency, save time and labor costs. The head is well sealed and can effectively prevent liquid or gas leakage and ensure the normal operation of all vehicle systems. In addition, the plastic quick joint head cost is low, cost-effective. At the same time, its appearance design is simple, and it does not take up too much space, providing convenience for the compact layout of the car.
-
V30W plastic quick connectors Adaptor NW26-ID25-0° for VDA Cooling Water
Item： V30W plastic quick connectors NW26-ID25-0° for VDA Cooling Water
Media: VDA Cooling Water
Size: NW26-ID25-0°
Hose fitted: NW26 to PA 25.0×29.0
Material: PA66+30%GF
Plastic adapter for automobile has many advantages, and the application scenario in automobile is very wide. In the automotive fuel system, Can be used to connect the tubing with different pipe diameter, Ensure the smooth delivery of the fuel oil, Prevent fuel oil leakage; In the cooling system, Can connect the coolant line, Ensure the normal circulation of the coolant between the engine and the radiator; In the braking system, Be available as a connector for pipe fittings, Enable the brake fluid to accurately transfer the pressure, Ensure the normal operation of the braking system; in addition, In the electrical systems of the cars, Plastic adapters can be connected to a variety of wires and harnesses, To realize the circuit conduction and signal transmission, For example, connect the connector of the vehicle charger to the interface of the car cigarette lighter, Charging the electronic devices; And in the installation of some car interior parts, Such as the connection of the air-conditioning and ventilation pipes, Plastic adapters also play an important role, It enables the pipes to be tightly connected, Ensure a smooth air flow, Provide a comfortable environment inside the car.
In the future, the plastic adapters used for automobiles will show the following development trends:
Lightweight: With the continuous improvement of the requirements for energy conservation and emission reduction in the automobile industry, lightweight has become an important development direction. The plastic adapter itself is light in weight, in line with this trend, and will be further optimized in material selection and structural design in the future to achieve more extreme lightweight, help reduce the weight of the vehicle, improve fuel efficiency or increase the range of electric vehicles.
High performance: the working environment of the car is complex and harsh, and the performance requirements of the adaptors are constantly improved. Future plastic adapters will have higher strength, better heat resistance, corrosion resistance and aging resistance, to adapt to various extreme conditions, to ensure the reliability and stability in the long-term use process. For example, new high-performance engineering plastics may be developed or modified to treat existing plastics to be used to greatly improve their performance.
Multi-function integration: In order to improve the integration and space utilization of automotive parts, plastic adapters may integrate more functions. For example, in addition to the connection function, it may also have sealing, shock absorption, noise reduction and other functions. Through the integrated design, reduce the number of parts, reduce the installation difficulty and cost, while improving the performance and quality of the vehicle.
Intelligence: With the development of automobile intelligence, plastic adapters may also incorporate intelligent elements. For example, with the sensor function, it can monitor the pressure, temperature, flow and other parameters in real time, and transmit data to the control system of the car, so as to find potential problems in time or realize accurate control and optimization of the relevant system.
Green environmental protection: in the background of increasing environmental awareness, the production and use of plastic adapters will pay more attention to environmental protection. On the one hand, in the selection of materials, it will tend to use recyclable and biodegradable environmental plastics to reduce the impact on the environment; on the other hand, in the production process, cleaner and energy-saving production processes to reduce energy consumption and pollutant emissions. -
N3F N3V 145° plastic quick connectors Φ18.9-3/4〞-ID16.5-45° for SAE Fuel System Liquid Vapor
Item： N3F N3V 145° plastic quick connectors Φ18.9-3/4〞-ID16.5-45° for SAE Fuel System Liquid Vapor
Media: SAE Fuel System Liquid
Buttons: 2
Size: Φ18.9-3/4〞-ID16.5-45°
Hose fitted: PA 16.5×18.5
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
Plastic quick connectors offer several notable advantages.
First, they are highly convenient. With their easy-to-use design, you can quickly connect and disconnect various components without the need for complicated tools or extensive technical knowledge. This saves time and effort in installation and maintenance processes.
They are also lightweight. This characteristic makes them easy to handle and transport, reducing the overall burden on workers and facilitating installation in different locations.Plastic quick connectors are often corrosion-resistant. Unlike metal connectors that may rust or corrode over time when exposed to moisture or certain chemicals, plastic ones can maintain their integrity and functionality in a wide range of environments.Moreover, they can provide a secure connection. Despite being made of plastic, these connectors are designed to ensure a tight fit and prevent leaks or disconnections, ensuring the smooth operation of systems they are a part of.In addition, plastic quick connectors are cost-effective. They are generally less expensive than their metal counterparts while still offering reliable performance, making them an excellent choice for various applications where budget is a consideration. -
P7F plastic quick connectors NG12NW12-0° NG SERIES Fuel System Liquid
Item：P7F plastic quick connectors NG12NW12-0° NG SERIES Fuel System Liquid
Media: NG SERIES Fuel System Liquid
Size: NG12NW12-0°
Hose fitted: PA 12.0 x 14.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -40°C to 120°C
Plastic quick connectors are a practical and efficient choice, offering convenience, light weight, cost-effectiveness, corrosion resistance, and a reliable seal.
First and foremost, they are highly convenient. With their easy-to-use design, you can quickly connect and disconnect components without the need for complex tools or extensive technical knowledge. This saves time and effort in various applications, whether it’s in plumbing, pneumatic systems, or industrial setups.
Plastic construction makes these connectors lightweight. This not only makes them easy to handle and install but also reduces the overall weight of the connected systems. This can be particularly beneficial in applications where weight is a concern, such as in portable equipment or in areas where structural support is limited.
They are also often cost-effective. Compared to metal connectors, plastic quick connectors are generally less expensive to produce and purchase. This makes them an attractive option for projects with budget constraints.
In addition, plastic quick connectors are resistant to corrosion. Unlike metal connectors that can rust or corrode over time when exposed to moisture or certain chemicals, plastic connectors maintain their integrity and functionality in a wide range of environments.
Moreover, they can provide a tight seal. This helps prevent leaks and ensures the efficient transfer of fluids or gases, enhancing the reliability and performance of the connected systems.
-
P8F plastic quick connectors NG12NW12-90° NG SERIES Fuel System Liquid
Item：P8F plastic quick connectors NG12NW12-90° NG SERIES Fuel System Liquid
Media: NG SERIES Fuel System Liquid
Size: NG12NW12-90°
Hose fitted: PA 12.0 x 14.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -40°C to 120°C
Plastic quick connectors are a practical and efficient choice, offering convenience, light weight, cost-effectiveness, corrosion resistance, and a reliable seal.
First and foremost, they are highly convenient. With their easy-to-use design, you can quickly connect and disconnect components without the need for complex tools or extensive technical knowledge. This saves time and effort in various applications, whether it’s in plumbing, pneumatic systems, or industrial setups.
Plastic construction makes these connectors lightweight. This not only makes them easy to handle and install but also reduces the overall weight of the connected systems. This can be particularly beneficial in applications where weight is a concern, such as in portable equipment or in areas where structural support is limited.
They are also often cost-effective. Compared to metal connectors, plastic quick connectors are generally less expensive to produce and purchase. This makes them an attractive option for projects with budget constraints.
In addition, plastic quick connectors are resistant to corrosion. Unlike metal connectors that can rust or corrode over time when exposed to moisture or certain chemicals, plastic connectors maintain their integrity and functionality in a wide range of environments.
Moreover, they can provide a tight seal. This helps prevent leaks and ensures the efficient transfer of fluids or gases, enhancing the reliability and performance of the connected systems.
-
B35F check valve backpressure valve clappet Plastic Fuel Quick Connector Φ7.89-5/16″-ID7-0° for SAE fuel system
Item: B35F check valve backpressure valve clappet Plastic Fuel Quick Connector Φ7.89-5/16″-ID7-0° for SAE fuel system
Media: Fuel system
Buttons: 2
Size: Φ7.89-5/16″-ID7-0°
Hose fitted: PA 7.0×9.0
Operating Pressure: 5 to 7 bar
Temprature: -30°C to 120°C
Detail Description：This plastic check valve used on automotive tubings and rubber hoses, it works on liquicd delivery on single directions, can effectively make sure liquid flow to single direction,prevent reflux.
-
H16 NW40 End Plug for Quick Connector dust proof cover dust cap SAE
Item: H16 NW40 End Plug for Quick Connector dust proof cover dust cap SAE
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H15 NW12 End Plug for Quick Connector dust proof cover dust cap SAE
Item: H15 NW12 End Plug for Quick Connector dust proof cover dust cap SAE
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H14 Φ18 End Plug for Quick Connector dust proof cover dust cap SAE
Item: H14 Φ18 End Plug for Quick Connector dust proof cover dust cap SAE
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H11 Φ18 End Plug for Quick Connector dust proof cover dust cap
Item: H11 Φ18 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H10 Φ16 End Plug for Quick Connector dust proof cover dust cap
Item: H10 Φ16 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H9 Φ14 End Plug for Quick Connector dust proof cover dust cap
Item: H9 Φ14 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H8 Φ18.90 End Plug for Quick Connector dust proof cover dust cap
Item: H8 Φ18.90 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H7 Φ12.61 1/2 〞End Plug for Quick Connector dust proof cover dust cap
Item: H7 Φ12.61 1/2 〞End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H6 Φ11.80/12 End Plug for Quick Connector dust proof cover dust cap
Item: H6 Φ11.80/12 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H5_2 Φ15.82/16 End Plug for Quick Connector dust proof cover dust cap
Item: H5_2 Φ15.82/16 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H5_1 Φ15.82/16 End Plug for Quick Connector dust proof cover dust cap
Item: H5_1 Φ15.82/16 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H5 Φ15.82/16 End Plug for Quick Connector dust proof cover dust cap
Item: H5 Φ15.82/16 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H4 Φ9.89 /10 End Plug for Quick Connector dust proof cover dust cap
Item: H4 Φ9.89 /10 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H3 Φ9.49 3/8 〞 End Plug for Quick Connector dust proof cover dust cap
Item: H3 Φ9.49 3/8 〞 End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H2 Φ7.89 5/16 〞End Plug for Quick Connector dust proof cover dust cap
Item:H2 Φ7.89 5/16 〞End Plug for Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
H1 Φ6.30 1/4〞End Plug for Quick Connector dust proof cover dust cap
Item:H1 Φ6.30 1/4〞End Plug Quick Connector dust proof cover dust cap
Material: PE
Function: To avoid dirty dust or other materials into quick connectors and influence aotomotive functions and performance!
The principle of using dust cover for auto parts is mainly to form a barrier around the parts to prevent dust, sediment, moisture and other impurities from entering the parts.
Its advantages are as follows:
1.Protective accessories: effectively prevent dust and impurities on the accessories wear and erosion, prolong the service life of accessories. For example, for key components such as the engine, the dust cover can reduce the entry of dust, reduce the wear speed of the internal parts of the engine, and maintain the performance of the engine stable.
2.Maintenance performance: prevent impurities from affecting the normal operation of the accessories. For example, the dust cover of electrical components can avoid short circuit and other faults caused by dust accumulation, and ensure the stable operation of the electrical system.
3.Easy to clean: The dust cover itself is relatively easy to clean, requiring only regular wiping or cleaning of the dust cover to maintain the clean environment around the accessories without complex cleaning operations for the accessories.
4.Beautiful and tidy: make the interior and outside of the car look more neat and beautiful. At the same time, it can also reduce the poor appearance of the car caused by the accumulation of dust.5. Improve reliability: reduce the probability of failure caused by impurity entry, improve the overall reliability of the car, and make you feel more secure while driving.
-
Plastic Male End Piece Nozzle Holder Φ7.89 for SAE VDA system
Item: ODM/OEM Plastic Male End Piece Nozzle Holder Φ7.89 for SAE VDA system
Size: Φ7.89
Hose fitted: Φ7.89
Material: PA12+30%GF
Working pressure : 5 to 7 bar
Temprature: -30°C to 120°C
-
W7 Wire Harness Protection Cover for automotive quick connector
Item：W7 Wire Harness Protection Cover for automotive quick connector
Suitable outer diameter of bellows : Φ10
-
W6 9.49-90° Protection Cover for automotive quick connector
Item：W6 9.49-90° Protection Cover for automotive quick connector
Size: 9.49-90°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W5 9.49-0° Protection Cover for automotive quick connector
Item：W5 9.49-0° Protection Cover for automotive quick connector
Size: 9.49-0°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W4 7.89-90° Protection Cover for automotive quick connector
Item：W4 7.89-90° Protection Cover for automotive quick connector
Size: 7.89-90°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W3 7.89-0° Protection Cover for automotive quick connector
Item：W3 7.89-0° Protection Cover for automotive quick connector
Size: 7.89-0°
Hose fitted: PA 6.0×8.0
Suitable outer diameter of bellows : Φ16
-
W2 6.30-90° Protection Cover for automotive quick connector
Item：W2 6.30-90° Protection Cover with automotive quick connector
Size: 6.30-90°
Hose fitted: PA 3.0×5.0 or PA 6.0×8.0
Suitable outer diameter of bellows : Φ13, Φ16
-
W1 6.30-0° Protection Cover with automotive quick connector
Item：W1 6.30-0° Protection Cover with automotive quick connector
Size: 6.30-0°
Hose fitted: PA 3.0×5.0 or PA 6.0×8.0
Suitable outer diameter of bellows : Φ13, Φ16
-
O3 OD14-OD14-OD14 Three-tube clamp for automotive tubings and hoses combine fix
Item：O3 OD14-OD14-OD14 Three-tube clamp for automotive tubings and hoses combine fix
Size: The outer diameter of nylon tube: Φ14
Hose fitted: nylon tube: Φ14
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
O2 OD10-OD8-OD10 Three-tube clamp for automotive tubings and hoses combine fix
Item：O2 OD10-OD8-OD10 Three-tube clamp for automotive tubings and hoses combine fix
Size: The outer diameter of nylon tube: Φ10, Φ8, Φ10
Hose fitted: nylon tube: Φ10, Φ8, Φ10
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
O1 OD16-OD60 Pipe clamp for automotive tubings and hoses combine fix
Item：O1 OD16-OD60 Pipe clamp for automotive nylon tubings and rubber hoses combine fix
Size: The outside diameter of nylon tube/rubber tube : Φ16, Φ60
Hose fitted: nylon tube/rubber tube : Φ16, Φ60
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
-
Y10 ID11-ID18-ID18 Reducing Y Shape Tee plastic for CQC Cooling Water adaptor
Item：Y10 ID11-ID18-ID18 Reducing Y Shape Tee plastic for CQC Cooling Water adaptor
Media: CQC Cooling Water
Size: ID11-ID18-ID18
Hose fitted: Rubber Hose ID18, PA 11.0×13.0
Material: PA12+30%GF
Operating Pressure: 5-7 bar
Ambient Temprature: -30°C to 120°C
